Engineering, 16.11.2019 05:31 NateTheBeast12

Asolutions architect was tasked with reviewing several templates that build vpcs and ensuring that they meet specific security requirements. after reviewing the templates, the architect realizes that all of the templates are missing important security best practices.
what should the architect do to implement security best practices in an efficient manner?

a. use vpc peering to enforce network consistency
b. restrict users from deploying an aws cloudformation template
c. provide the teams a nested aws cloudformation template that builds the vpc correctly
d. create aws identity and access management (iam) policies that enforce the corporate vpc architecture standards

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 06.07.2019 04:10, blaqsafire9291

Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.

Answers: 3

continue

Engineering, 06.07.2019 04:20, hailiemanuel930

Steam enters a turbine at steady state at 2 mpa, 360°c with a velocity of 100 m/s. saturated vapor exits at 0.1 mpa and a velocity of 50 m/s. the elevation of the inlet is 3 m higher than at the exit. the mass flow rate of the steam is 15 kg/s, and the power developed is 7 mw. let g 9.81 m/s^2. determine: a)-the area at the inlet, in m^2 b)-the rate of heat transfer between the turbine and surroundings, in kw c)-draw a p-v diagram for this process.

Answers: 1

continue

You know the right answer?

Asolutions architect was tasked with reviewing several templates that build vpcs and ensuring that t...